About Our Products

Circular Arches
Installing Vintage circular arches is easy as our arches are made in Rub-R-Wood© - we do the bending to fit your opening.

Vintage arches are available in all MDF profiles to fit most openings. To order use the handy printable arch order form and be sure to fill out all information. Even though arches are made of a flexible material it is necessary to make them in a curve as close as possible to the opening. Then, if there is some variation in the over-all curve of the opening, the material can be bent to fit. However, keep in mind the wider the material, the less bending that can take place.

Primed MDF Mouldings
Vintage Mouldings uses moulding quality MDF for all our mouldings which is machined on a high speed multi-head digital moulder. Next is a two-coat double sanded priming process to ensure a smooth surface for painting. This ensures that the proper adhesion of paint to primer will take place. After each coat of primer is applied it is oven baked to a hard finish. The second sanding allows the installer to immediately paint without having to pre-sand. Any high quality latex or oil paint can then be applied.

Rub-R-Wood© Flexible Mouldings
Rub-R-Wood© is the answer for installing mouldings around curved areas. It also eliminates having to do kerf cuts, bend, and fill a solid moulding in order to bend it around a curved wall, this reduces cost and installation time. All our Rub-R-Wood© mouldings are available on a special order basis and can normally be ready within 5 to 10 business days.

Rub-R-Wood is made from a polymer resin and can be used for exterior applications - great for those arch doors and windows.

MasterPlaster© Mouldings
Vintage Mouldings has introduced a line of reproduction embossed plaster mouldings. We all know how heavy and fragile plaster can be so Vintage has solved both problems. MasterPlaster© mouldings are authentic reproductions of age old embossed mouldings but with a major difference: they are made from a polymer that is both lightweight and durable and can also be used for exterior applications. Being an authentic reproduction, any surface irregularities reflect the skill and individuality of the craftsman who toiled long hours to produce an architectural ornament that would bring a feeling of ambience and well being to any decor. We hope the ease of installing these products will allow you to enjoy many fine hours of relaxation.

PolyPlaster© Mouldings
PolyPlaster© Mouldings, for interior and exterior uses, are made from a high-density poly resin, injected under five tons of pressure to produce a very hard and durable product. A primer is chemically bonded to the product during the casting process.

PolyPlaster© offers an extremely lightweight product for installing in high or hard to work areas where a heavy product would require additional manpower or equipment. PolyPlaster© can be cut, nailed, glued and screwed by anyone familiar with wood moulding installation.

Medallions
Being an authentic reproduction, any surface irregularities reflect the skill and individuality of the craftsman who toiled long hours to produce an architectural ornament that would bring a feeling of ambience and well being to any decor.

All ceiling medallions have a centre of 3 ¾" in diameter. This accommodates the use of a standard 4" diameter electrical box.